Moog One

104
EFFECTS APPENDIX
NOTE: When the Sync parameter is set to On, the value of certain time-based parameters will
automatically switch from absolute and variable ms values to clock-division values based the Master Clock.
Fractional clock-division values will be presented in three different versions, 1/4T, 1/4, and 1/4., for example.
In the rst Triplet version, the timing is modied to play at 2/3rds of the Straight value. The second version
is the Straight Value. In the third Dotted version, the timing is modied to play at 1.5 x the Straight Value.
The complete SYNC value range for the effects is:
{1/64T, 1/64, 1/64., 1/32T, 1/32, 1/32.,1/16T, 1/16, 1/16., 1/8T, 1/8, 1/8., 1/4T, 1/4, 1/4., 1/2T, 1/2, 1/2., 1, 2, 4}
MIX AMOUNT OF DELAY SIGNAL IN THE OUTPUT 0% to 100% CTRL 1
FEEDBACK DELAY SIGNAL FED BACK TO THE INPUT 0% to 100%
TIME DELAY TIME 0.1ms to
2000ms
CTRL 2
GAIN GAIN STAGE OF THE PROCESSED SIGNAL 0% to 100%
SYNC SYNC ON OR OFF ON, OFF
PARAMETER NAME PARAMETER DESCRIPTION RANGE ASSIGNED
MIX AMOUNT OF DELAY SIGNAL IN THE OUTPUT 0% to 100% CTRL 1
FEEDBACK DELAY SIGNAL FED BACK TO THE INPUT 0% to 100% CTRL 2
TIME LEFT DELAY TIME FOR THE LEFT SIDE 0.1ms to
2000ms
TIME RIGHT DELAY TIME FOR THE RIGHT SIDE 0.1ms to
2000ms
FEEDBACK LEFT DELAY SIGNAL FED BACK TO THE LEFT CHAN 0% to 100%
FEEDBACK RIGHT DELAY SIGNAL FED BACK TO THE RIGHT CHAN 0% to 100%
MOD RATE LEFT MODULATION RATE LEFT CHAN 0% to 100%
MOD RATE RIGHT MODULATION RATE RIGH CHAN 0% to 100%
MOD DEPTH LEFT DEPTH OF MODULATION LEFT CHAN 0% to 100%
MOD DEPTH RIGHT DEPTH OF MODULATION RIGHT CHAN 0% to 100%
TONE LPF TONE CONTROL 0% to 100%
GAIN GAIN STAGE OF THE PROCESSED SIGNAL 0% to 100%
SYNC SYNC ON OR OFF ON, OFF
DELAY (Single Tap Digital Delay Line; Cubically Interpolated)
STEREO DELAY (Dual Tap Digital Delay Line; Cubically Interpolated with Stereo Spatialization)
)