Moog One

109
MIX AMOUNT OF EFFECT SIGNAL IN THE OUTPUT 0% to 100% CTRL 1
DEPTH BIT DEPTH 2-BIT to 24-
BIT
CTRL 2
RATE SAM PLE RATE 128Hz to
48kHz
GAIN GAIN STAGE OF THE PROCESSED SIGNAL 0% to 100%
MIX AMOUNT OF EFFECT SIGNAL IN THE OUTPUT 0% to 100% CTRL 1
RESONANCE RESONANCE FOR THE THREE FILTERS 0% to 100% CTRL 2
CUTOFF LOW CUTOFF/CENTER FREQUENCY OF FILTER 1
(DEFAULT VALUE = 500Hz)
10Hz to 22kHz
CUTOFF MID CUTOFF/CENTER FREQUENCY OF FILTER 2
(DEFAULT VALUE = 1kHz)
10Hz to 22kHz
CUTOFF HIGH CUTOFF/CENTER FREQUENCY OF FILTER 1
(DEFAULT VALUE = 5kHz)
10Hz to 22kHz
LEVEL LOW LEVEL OF FILTER 1 0% to 100%
LEVEL MID LEVEL OF FILTER 2 0% to 100%
LEVEL HIGH LEVEL OF FILTER 3 0% to 100%
FILTER TYPE RESPONSE TYPE OF THE THREE FILTERS LP, BP, HP
MOD R ATE RATE OF MODULATION 0.01Hz to
10Hz
MOD DEPTH DEPTH OF MODULATION 0% to 100%
GAIN GAIN STAGE OF THE PROCESSED SIGNAL 0% to 100%
MIX AMOUNT OF VOCODER SIGNAL IN THE OUTPUT 0% to 100% CTRL 1
SIBILANCE AMOUNT OF SIBILANCE SIGNAL MIXED INTO
THE OUTPUT
0% to 100%
SENSITIVITY GATE SENSITIVITY CONTROL FOR THE MIC
INPUT
0% to 100% CTRL 2
TONE HPF OF SIBILANCE NOISE/SIGNAL 0% to 100%
NOISE MIX BETWEEN INPUT SIBILANCE SIGNAL &
HPF NOISE
0% to 100%
MIX AMOUNT OF VOCODER SIGNAL IN THE OUTPUT 0% to 100% CTRL 1
SIBILANCE AMOUNT OF SIBILANCE SIGNAL MIXED INTO
THE OUTPUT
0% to 100%
SENSITIVITY GATE SENSITIVITY CONTROL FOR THE MIC
INPUT
0% to 100% CTRL 2
TONE HPF OF SIBILANCE NOISE/SIGNAL 0% to 100%
NOISE MIX BETWEEN INPUT SIBILANCE SIGNAL &
HPF NOISE.
0% to 100%
BIT CRUSHER (Crossover Filter for Dual Bit Crushing)
RESONATOR (Resonant Filterbank)
10 BAND VOCODER (Vintage Style Ten-Band Vocoder)
16 BAND VOCODER (Vintage Style Sixteen-Band Vocoder)