Moog One

55
OUTPUT (Continued)
INSERT 2 - SYNTH 1 (OFF, ON)
Setting this parameter to On will route Synth 1 to the INSERT 2 buss.
INSERT 2 - SYNTH 2 (OFF, ON)
Setting this parameter to On will route Synth 2 to the INSERT 2 buss.
INSERT 2 - SYNTH 3 (OFF, ON)
Setting this parameter to On will route Synth 3 to the INSERT 2 buss.
INSERT 3 - SYNTH 1 (OFF, ON)
Setting this parameter to On will route Synth 1 to the INSERT 3 buss.
INSERT 3 - SYNTH 2 (OFF, ON)
Setting this parameter to On will route Synth 2 to the INSERT 3 buss.
INSERT 3 - SYNTH 3 (OFF, ON)
Setting this parameter to On will route Synth 3 to the INSERT 3 buss.
INSERT 3 - EXT 1/4 (OFF, ON)
Setting this parameter to On will route an audio signal arriving at the EXT INPUT 1/4” jack to the
INSERT 3 buss.
INSERT 4 - SYNTH 1 (OFF, ON)
Setting this parameter to On will route Synth 1 to the INSERT 4 buss.
INSERT 4 - SYNTH 2 (OFF, ON)
Setting this parameter to On will route Synth 2 to the INSERT 4 buss.
INSERT 4 - SYNTH 3 (OFF, ON)
Setting this parameter to On will route Synth 3 to the INSERT 4 buss.
INSERT 4 - EXT XLR (OFF, ON)
Setting this parameter to On will route an audio signal arriving at the EXT INPUT XLR jack to the
INSERT 4 buss.
INSERT 1 - VOLUME (-96 dB to 0 dB to +22 dB)
This parameter allows the volume of the INSERT 1 Output to be set independently.
INSERT 2 - VOLUME (-96 dB to 0 dB to +22 dB)
This parameter allows the volume of the INSERT 2 Output to be set independently.
INSERT 3 - VOLUME (-96 dB to 0 dB to +22 dB)
This parameter allows the volume of the INSERT 3 Output to be set independently.
INSERT 4 - VOLUME (-96 dB to 0 dB to +22 dB)
This parameter allows the volume of the INSERT 4 Output to be set independently.