Moons' MSST10-S - Technical Specifications

28
29
Rev:5.0
6/08/2010
Rev:5.0
6/08/2010
MSST5/10-S UserManual
MSST5/10-S UserManual
6 Reference Materials
6.1 Mechanical Outlines
6.2 Technical Specications
POWER AMPLIFIER SECTION: -S
AMPLIFIER TYPE MOSFET , Dual H-Bridge, 4 Quadrant
CURRENT CONTROL 4 state PWM at 20 KHz
OUTPUT CURRENT
MSST5: 0.1 - 5.0 amps/phase (Peak value) in 0.01 amp increments
MSST10: 0.1 - 10.0 amps/phase (Peak value) in 0.01 amp increments
POWER SUPPLY
MSST5: External 24 - 48VDC power supply required
MSST10: External 24 - 80VDC power supply required
INPUT VOLTAGE
RANGE
MSST5: 18 - 53VDC
MSST10: 18 – 88VDC
PROTECTION
Over-voltage, under-voltage, over-temp, external output shorts (phase
to-phase, phase-to-ground), inter amplier shorts
IDLE CURRENT
REDUCTION
Reduction to any integer percent of full-current after a delay selectable in
milliseconds
93
50.3
15.5
17
86
76
26.5
Unit:mm
6-4.1