Moons' SSDC06-R - Getting Started with SSDC Drives

6
Rev. 1.0
10/22/2018
SSDC-R/C Hardware Manual
400-820-9661
2 Getting Started
The following items are needed:
• A 12-70VDC power supply, see the section below entitled
“
Choose a Power Supply
”
for
helping to choose the right one.
• A compatible SS or RS motor, please see the section below entitled
“
Recommended Motor
”
• A small flat blade screwdriver for tightening the connectors screw(included)
• A PC running Microsoft Windows XP/Vista/7/8(Using serial communication port. Prepare an
USB to Serial converter if the PC doesn
’
t have it.
• Install the Step-Servo Quick Tuner software (download from MOONS website: www.
moonsindustries.com )
• A power cable(included)
• Communication cable:
-R type
：
Included a CAT5 cable, used to do the daisy-chain connection for the RS-485/422
network. It is used to configure the drive.
-C type
：
Included a RS-232 serial cable, used to configure the drive.Included a CAT5 cable,
used to do the daisy-chain connection for the CANopen network.
• Optional extended motor cable(Sold separately)
• Optional extended encoder cable(Sold separately)
• Optional extended I/O cable(Sold separately)