Moons' STF-4X-ECX Series - Y2 Brake Output

12
Rev. 1.0
08/12/2023
400-820-9661
STF-4X-ECX Hardware Manual
3.3 Y2 Brake Output
Y2: Brake direct drive, photoelectric isolation, 24V, 1A
Y2 brake signal output wiring method
：
(Warning: Do not connect the output terminal to a DC voltage above 24V, and the current
flowing into the output terminal shall not exceed 1A)
Y2 brake signal output wiring
STF 5-24 VDC
Power Supply
V+
24V+_BR
BRAKE
24V-_BR
BR
V-