Moons' STF-D series - 2 Getting Started

6
Rev. 1.0
11/28/2017
STF-D/IP Hardware Manual
400-820-9661
2 Getting Started
The following items are needed:
• A 12-48VDC power supply (24-48VDC power supply for STF05, and 24-70VDC power supply
for STF10). Please read the section below entitled “Choosing a Power Supply” for help in
choosing the right one.
• A compatible stepper motor, please see the section below entitled “Recommended Motor”
• A small flat blade screwdriver for tightening the connectors screw(included)
•
A PC running Microsoft Windows XP / Vista / Windows 7/ Windows 8/ Windows 10(32-bit or
64-bit)operation system
• A CAT5 cable for Ethernet daisy chain connection (included).
• Optional I/O cable.
• Install STF Congurator software(Available from MOONS’website).