Moons' STF10-R User Manual

11
Rev. 1.0
11/08/2017
STF-R/C Hardware Manual
400-820-9661
2.3 Connecting communication (-C model)
CANopen COM Port
1818
COM1 COM2
PIN COM1 Signal COM2 Signal Wire Color
1 CAN_H CAN_H ORG/WHT
2 CAN_L CAN_L ORG
3,7,8 GND GND GRN/WHT, BRN/WHT, BRN
4 RS-232_TX NC BLU
5 RS-232_RX NC BLU/WHT
6 NC NC GRN
PC connection with RS-232 cable
Before using STF congurator for –C drive configuration, please connect COM1 on the driver to
host PC by RS-232 programming cable.
CANopen network connection
Multiple –C model drive network can be built via dual CANopen communication port by network
cable provided.
NOTE: The CANopen port on the drive is isolated from internal circuitry of the drive. So the
GND of each drive’s CANopen port must be connected together. The rst drive’s GND of
the CANopen port must be connected to the GND of CANopen port on the controller.

Moons' STF10-R Specifications

General

Brand	Moons'
Model	STF10-R
Category	Control Unit
Language	English