Morehouse UCM - Drawings & Parts Lists

Universal Calibrang Machine
(UCM) Manual
(PM-5201)
Morehouse Instrument Company, Inc.
1742 Sixth Ave., York, PA 17403-2675 USA
Phone: (717) 843-0081
www.mhforce.com
Page 36
Rev. 3/2024
6.5 Drawings & Parts Lists
Figure 25 and the associated parts list, illustrate replacement parts available for the standard hand pump com-
monly supplied with Morehouse Universal Calibrang Machines. Drawings and parts lists for specic capacity
calibrang machines and hydraulic jacks are supplied separately. If copies of drawings and parts lists of a spe-
cic capacity calibrang machine or hydraulic jack are required, contact Morehouse to request the the appro-
priate drawings. When ordering repair parts, please include the serial number and capacity of the calibrang
machine (as engraved on the nameplate) and state the part number, name, and quanty required. To order
parts, contact info@mhforce.com.
Figure 25: Hand Pump Assembly (Drawing 214000A-01)