Cephalo Exposures
45 Degree Slant Exposure
Set the craniostat at a 45 degree angle to either the right or left.
Set the unit for a PA Exposure.
Hand Exposure
1. Select PA Exposure.
2. Turn the Density Compensation off.
3. Set tube current for 1 mA.
* 90 kV and 1 mA are rough estimates for a child, but mA can
be adjusted depending on the patient’s size.
* Cephalo exposures cannot be made with Auto Exposure.
4. Attach the Hand X-ray Plate to the patient guard.
5. Set the craniostat in the PA Exposure position.
Raise the nasion plate up.
Open the ear rod plates all the way.
To Next Page
Loading...
