To Next PageTo Next Page
Need help?Do you have a question about the Morningstar ProStar PS-30M-PG and is the answer not in the manual?
General| Type | PWM |
|---|---|
| Rated Current | 30A |
| Rated Solar Current | 30A |
| Display | LED |
| Operating Temperature | -40°C to +60°C |
| Non-Isolated Negative Ground | Yes |
| System Voltage | 12V/24V |
| Input Voltage | 12/24 VDC |
| Maximum PV Input | PV Input Voltage: 40V |
| Maximum Output Power | 360W (12V), 720W (24V) |
| Self Consumption | Less than 10 mA |
| Voltage Accuracy | +/- 0.1V |
| Protections | Overload, short circuit, over temperature |
Describes the function of the green charging LED indicating system status.
Details the meaning of the battery status LEDs (green, yellow, red).
Explains the precision 3-digit digital meter display and its operation.
Describes how to use the push button to disconnect Load or Solar/Load.
Lists conditions displayed on the digital meter for disconnects and protections.
Details how to initiate and interpret the controller's self-diagnostic test.
Offers important general guidelines and considerations for installation.
Instructions for mounting the controller to a vertical surface.
Confirms that solar array and load current do not exceed ProStar ratings.
Instructions for connecting the battery, including voltage checks and polarity.
Guidance on connecting the battery sense wires for accurate charging.
Instructions for connecting the solar array, including voltage confirmation.
Steps for connecting and testing the load connection.
How to select the correct battery type using the rotary switch.
Verifying proper operation after installation using LEDs and meter.
Instructions for system grounding for safety and lightning protection.
Lists the manual tasks an operator performs with the ProStar controller.
Details key operating features like PWM charging, LVD, and parallel controllers.
Explains the various system faults the ProStar is protected against.
Recommends periodic checks and maintenance for optimal performance.
Describes optional features like the remote temperature probe and telecom noise jumper.
Details the 4 stages of the ProStar's charging method.
Guide to selecting the appropriate battery type for charging algorithms.
Highlights features that contribute to optimal battery life.
How to perform self-tests to identify ProStar failures.
Where to find additional technical information and support.
Procedures for testing the controller using an external power supply.
Steps to diagnose and fix issues where the battery is not charging.
Explains causes and checks for excessively high battery voltage.
Guide to troubleshooting issues with the load connection or function.
