What to do if my Mortara ELI 280 Medical Equipment has high freq. noise?
If your Mortara Medical Equipment is showing high frequency noise, adjust the low pass filter setting, check proximity to power cables, and check the AC filter setting (50 Hz or 60 Hz).
How to fix poor LA electrode, or left arm tremor on Mortara Medical Equipment?
To resolve a poor LA electrode or left arm tremor issue on your Mortara Medical Equipment, check the patient prep; re-prep if necessary with a new electrode.
How to fix poor LL electrode or left leg tremor on Mortara ELI 280 Medical Equipment?
If you're experiencing a poor LL electrode or left leg tremor while using your Mortara Medical Equipment, check the patient prep and re-prep if necessary using a new electrode.
How to fix poor RA electrode or right arm tremor on Mortara Medical Equipment?
To address a poor RA electrode or right arm tremor with your Mortara Medical Equipment, check the patient prep and re-prep if necessary with a new electrode.
What to do if my Mortara Medical Equipment unable to acquire ECG or unable to print?
If your Mortara Medical Equipment is unable to acquire ECG or unable to print, charge the battery with AC power.
How to fix lead fail on Mortara ELI 280 Medical Equipment?
To fix a lead fail on your Mortara Medical Equipment, check the limb leads and correct any faulty lead(s).
What to do if my Mortara ELI 280 is not responding?
If your Mortara Medical Equipment is not responding, press and hold the On/Off button for 10 seconds. Note that re-entry of date and time will be required after performing this action.
Details the warranty coverage for products and consumables, including time periods.
Provides general safety advice and specific warnings related to device operation.
Details safety practices for electrical connections, patient leads, and defibrillation.
Step-by-step instructions for cleaning and disinfecting the device and its components.
Specifies the medical conditions and populations for which the device is indicated.
Provides an overview of the device's capabilities and diagrams of its components.
A comprehensive list of the ELI 280's technical features and specifications.
Steps for initial device setup and calibrating the touchscreen display.
Guides on powering the device on/off and understanding battery status.
Procedures for preparing the patient and their skin before ECG acquisition.
Guidance on correct electrode placement and a hookup summary table.
Methods for entering patient demographics: manual, stored, orders, and barcodes.
Instructions for setting up the ECG display format, speed, gain, and filter.
Procedures for acquiring ECGs, STAT ECGs, and understanding notification messages.
General ECG transmission methods and how to test RF signal strength.
Instructions for connecting to a Local Area Network and interpreting status LEDs.
Procedures for connecting to a Wireless Local Area Network and configuring security.
Methods for transferring data using USB memory sticks and PC connections.
Information on accessing and searching the ECG directory for patient records.
Instructions for performing a Patient Demographic Query using search tools.
Information on device passwords and procedures for setting or changing them.
General| ECG Type | 12-Lead |
|---|---|
| Number of Leads | 12 |
| Type | Resting ECG |
| Channels | 12 |
| Display | LCD |
| Connectivity | USB, Ethernet |
| Paper Size | A4 |
| Sampling Rate | 1000 samples per second per channel |
| Digital Resolution | 5 μV |
| Power Supply | AC 100-240V, 50/60Hz |
To Next Page
