TECHNICAL SPECIFICATIONS – FOLDING WHEELCHAIRS | USER MANUAL
9
T 1-866-650-6555 F 1-888-966-6555 E-mail info@motioncomposites.com
OTHER WARNINGS AND IMPORTANT INFORMATION
Initial setup of your Motion composites wheelchair must be
done by a qualified technician.
Regular maintenance of your Motion composites wheelchair
will extend the life of the wheelchair. Take your wheelchair to
a qualified technician every year for inspection and servicing.
Do not use air or electric tool, tightening should be done
manually.
The latest version of this manual can be found on our website at
www.motioncomposites.com
3. TUTORIAL
To find the latest tutorial or information or contact team at
www.motioncomposites.com
4. TECHNICAL SPECIFICATIONS
4.1 BACK UPHOLSTERY
All Upholstery are made with waterproof material that can be
cleaned.
Seams are not waterproof.
The adjustable tension back upholstery is made of waterproof
material. Active-Mesh or Syntech Suede, found on slip-on or semi-
tension adjustable back uphol-stery, can absorb moisture.
– Padding: foam
– Thickness: 10 mm
– Compression hardness: 0,231 - 0,258 kPa
– Foam volume weight: 32,0 - 33,6 kg / m
3
– Cover material: Polyester and Nylon antimicrobial, antifungal,
Cal-117 Flame resistant
4.2 CUSHION
All cushions are made of waterproof material that can be cleaned.
Seams are not waterproof.
– Padding: foam
– Thickness: 2 in. or 3 in. / 51 or 76 mm
– Compression hardness: 0.245 - 0.289 kPa
– Foam density: 43.2 - 46.5 kg / m
3
– Cover Material: Antimicrobial and Antifungal Polyurethane,
Fire Resistant Cal-117.
4.3 ARMREST PAD
The armrest is made of waterproof material that can be cleaned.
– Padding: foam
– Thickness: 26 mm
– Compression hardness: 0.95 - 0.510 kPa
– Foam density: 69.2 - 71.5 kg / m
3
– Cover Material: Vinyl
To Next Page
Loading...
Need help?
General
