case letters (a – z and A – Z), numbers (0 - 9) and special characters (e.g. $_/& etc.)
except the single quote ‘ .
Password can be from 8 - 63 characters long. You can use upper and lower case
letters (a – z and A – Z), numbers (0 - 9) and special characters (e.g. $_/& etc.) except
the single quote ‘ .
Changing Firewall Settings
A Firewall helps protect your Model MG7540 and the devices attached to it from
harm from outsiders connecting via the Internet. Model MG7540 comes with
reasonable firewall settings. The firewall allows all normal traffic to pass, but
protects against well-known attacks. Normally you just leave the firewall settings
in place. If you want to change them, you go to the ProtectionFirewall section of
the Configuration Manager. First log into the Configuration Manager as described
in chapter 6. In summary, you type 192.168.0.1 in the address bar of your
browser, go to that address, enter the Username admin and Password motorola,
then click the Login button.
This will bring you to the Basic Status and Settings page. Click the Advanced
button in the upper right. This will bring you to the Status Software page.
Hover over the Protection & Parental Control menu item, and select the Firewall
submenu.
To Next Page
Loading...
