8 AP6532 Access Point
2 Hardware Installation
2.1 Installation Instructions
The AP6532 Access Point mounts either on a wall (with wide-shoulder screws) or on a suspended ceiling T-bar. This
unit is not designed for mounting on a desk.
To prepare for the installation, perform the following:
1. Match the model number on the purchase order with the model numbers in the packing list and on the
case of the device shipped.
2. Verify the contents of the box include the intended AP6532 Access Point and that the included hardware
matches the package contents (see
AP6532 Package Contents).
3. Review site survey and network analysis reports to determine the location and mounting position for the
AP6532 Access Point.
Part Number Description
AP-6532-66030-US Dual 802.11n radio AP6532. Plastic enclosure with internal
antennas US version
AP-6532-66030-OUS Dual 802.11n radio AP6532. Plastic enclosure with internal
antennas US version for outdoor installation
AP-6532-66030-EU Dual 802.11n radio AP6532. Plastic enclosure with internal
antennas EU version
AP-6532-66030-WW Dual 802.11n radio AP6532. Plastic enclosure with internal
antennas World Wide version
AP-6532-66040-US Dual 802.11n radio AP6532. Metal enclosure with external
antennas US version
AP-6532-66040-OUS Dual 802.11n radio AP6532. Metal enclosure with external
antennas US version for outdoor installation
AP-6532-66040-EU Dual 802.11n radio AP6532. Metal enclosure with external
antennas EU version
AP-6532-66040-WW Dual 802.11n radio AP6532. Metal enclosure with external
antennas World Wide version
NOTE
In the above part numbers, XX represents the 2-digit country code which
specifies which country the model is designed for. A country code of “US”
represents a United States model. A country code of “EU” represents a
European Union model. A country code of “WW” represents a world wide
model. The letter “O” preceding the 2-digit country code specifies the
model is designed for outdoor installation.
To Next Page
Loading...
Need help?
General
