Motorola APX 7000 User Manual

Incoming emergency call.
LED Indicator
The LED indicator shows the operational status of
your radio.
A
Solid red Radio is transmitting.
Blinking red Radio is transmitting at low
battery condition.
Double blinking
red
Radio is in Emergency Mode.
Rapidly blinking
red
Radio has failed the self test
upon powering up or
encountered a fatal error.
Solid yellow
(Conventional
Only)
Channel is busy.
Blinking yellow Radio is receiving a secured
transmission.
Solid green Radio is powering up, or is on
a non-priority channel while in
the Scan List Programming
mode.
Blinking green Radio is receiving an individual
or telephone call, or is on a
Priority-Two channel while in
the Scan List Programming
mode.
Rapidly blinking
green
Radio is on a Priority-One
channel while in the Scan List
Programming mode.
Note: No LED indication when the radio receives a
clear (non-secured) transmission in trunking Mode.
LED indication can be preprogramed by qualified
technician to be permanently disabled. Consult your
dealer for further details if you want to disable it.
Identifying Status Indicators
51
English

Motorola APX 7000 Specifications

General

Digital Technology	P25 Phase 1 and Phase 2
Emergency Button	Yes
Frequency Range	136-174 MHz (VHF), 380-470 MHz (UHF Range 1), 450-520 MHz (UHF Range 2), 764-870 MHz (700/800 MHz)
Display	Color LCD
Encryption	AES, DES
Water Resistance	IP67
GPS	Yes
Bluetooth	Yes
Operating Temperature	-30°C to +60°C
Weight	391 g (with standard battery)