If the caller name is not in the call list, the display
shows the caller ID.
2 Press and hold the PTT button to talk. Release the
PTT button to listen.
3
Press or the Call Response button to hang up
and return to the Home screen.
See also Making a Private Call (Trunking Only) on
page 65 for details on making a Private Call.
Receiving and Responding to a Telephone Call
(Trunking Only)
This feature allows you to receive calls similar to
standard phone calls from a landline phone.
Note: With the inactivity timer enabled (optional), if
there is no response to the call after the timer expires,
your radio exits the call with Menu Inactive Exit tone.
When you receive a Telephone Call, you hear
telephone-type ringing and the LED blinks green. The
display shows Phone Call and the call received icon
blinks.
1 Press the Call Response button within 20
seconds after the call indicators begin.
2 Press and hold the PTT button to talk. Release the
PTT button to listen.
3
Press or the Call Response button to hang up
and return to the Home screen.
See also Making a Telephone Call (Trunking Only) on
page 67 for details on making a Telephone Call.
Making a Radio Call
You can select a zone, channel, subscriber ID, or
talkgroup by using:
• The preprogrammed Zone switch.
• The 16-Position Select Channel Knob.
• A preprogrammed One Touch Call button.
• The Contacts list (see Viewing Details of a Contact
on page 82).
Note: The radio automatically exits the feature, if the
feature inactivity timer is enabled, when the radio is
left idle and the timer expires. You will hear the Menu
Inactive Exit Tone upon feature exit.
64
English
To Next Page
Loading...
Need help?
General
