EasyManua.ls Logo

Motorola APX 900 - Pairing the Authentication PIN by Manually Keying in the same PIN

Motorola APX 900
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
If successful, the display shows Pairing in progress,<Device Friendly
Name> paired, Connecting in progress... followed by <Device Friendly
Name>connected. The display returns to the Bluetooth feature screen.
If unsuccessful, one of the following scenarios will occur:
The display shows <Device Friendly Name> pair failed (if the PIN numbers are
different).
<Device Friendly Name> connect failed (if the connection fails).
The display returns to Available Dev screen.
7.22.1.3
Pairing the Authentication PIN by Manually Keying in the Same PIN
Prerequisites: Follow the procedure in Searching and Pairing the Bluetooth Device to search for
available Bluetooth devices. Start pairing with the Authentication PIN by following the steps described
next.
Procedure:
1
or to the required device. Press the Menu Select button directly below Sel to initiate
pairing.
Your radio only supports HSP, DUN, PAN and SPP Bluetooth profiles.
If successful, the display shows Pairing in progress... followed by a request for PIN
number. A blinking cursor appears below the Enter PIN:.
If unsuccessful, the display shows BT profiles not supported. The display returns to
Available Dev screen.
2 Use the keypad to enter the PIN. Press
to move one space to the left. Press to move one
space to the right. Press the Menu Select button directly below Del to delete.
3 Press Ok to continue pairing the radio and the device. Enter the same PIN number on the
device.
The pairing process can be canceled by pressing the Menu Select button below Cncl.
If successful, the display shows Pairing in progress,<Device Friendly
Name> paired, Connecting in progress... followed by <Device Friendly
Name>connected. The display returns to the Bluetooth feature screen.
If unsuccessful, one of the following scenarios will occur:
The display shows <Device Friendly Name> PIN auth fail (if the PIN numbers are
different).
<Device Friendly Name> connect failed (if the connection fails).
The display returns to Available Dev screen.
MN003441A01-AP
Chapter 7 : Advanced Features
106

Table of Contents

Related product manuals