Motorola APX 900 - Viewing a Saved Waypoint; Editing the Alias of a Waypoint

• The display shows Current loc saved as [Destination].
5 To return to the Home screen, press , the PTT button, the preprogrammed GPS button or
the Back button.
7.19.7
Viewing a Saved Waypoint
Prerequisites: Ensure your radio shows the current location on the screen.
Procedure:
1 Press the Menu Select button directly below Optn.
2
or to Waypoints and press the Menu Select button directly below Sel.
The display shows a list of waypoints.
3 Perform one of the following actions:
• or to scroll through the list.
• or to select a waypoint to view the location information in full.
4 Press the Menu Select button directly below Optn.
5 To view the MGRS or latitude/longitude location, time and date of the selected waypoint, or
to View and press the Menu Select button directly below Sel.
6 To return to the previous screen, press the Menu Select button directly below Back, or to return
to the Home screen, press
, the PTT button, or the preprogrammed GPS button.
7.19.8
Editing the Alias of a Waypoint
Prerequisites: Ensure your radio shows the current location on the screen.
Procedure:
1 Press the Menu Select button directly below Optn.
2 or to Waypoints and press the Menu Select button directly below Sel .
The display shows a list of waypoints.
3
or to the required saved waypoint, and press the Menu Select button directly below
Optn.
4 or to Edit name and press the Menu Select button directly below Sel .
A blinking cursor appears in the Edit Name screen.
5 Use the keypad to edit the alias.
6 Perform one of the following actions:
• Press the Menu Select button directly below Ok once you are done.
• Press the Back button to return to the Waypoints main screen.
7 The display shows <Waypoint name> Updated and the radio returns to the Waypoints main
screen.
8 Perform one of the following actions:
MN003441A01-AP
Chapter 7 : Advanced Features
97