4 Press OK.
The radio displays Radio Param and Zn/Ch Param.
7.26.17.2
Changing Password (Optional)
Radios from the Motorola Solutions factory are provisioned with a blank password.
Prerequisites: To access the protected channels, press OK when the Enter Old Password
prompts you to change the password.
Procedure:
1 Press EDIT.
2 Enter the old password.
3 Enter the new password.
4 To accept the entry, enter the new password again.
7.26.17.3
Selecting a Channel within a Zone
Procedure:
1 Press
or to FPP and press the Menu Select button directly below FPP.
The radio displays the Enter password screen
2 Enter the password and press the Menu Select button directly below Ok.
3 Press
or to select Zn/Ch.
4 Press or to select the required zone and press SEL to view the channels.
5 Press or to select the required channel and press SEL to access the channel
parameter.
The radio displays the channel parameter screen.
6 Press or to select the required channel parameter.
7.26.17.4
Changing a Channel Parameter
Procedure:
1 Press or to FPP and press the Menu Select button directly below FPP.
The radio displays the Enter password screen
2 Enter the password and press the Menu Select button directly below Ok.
3
or to scroll through the various information.
4 Press EDIT to edit the channel parameter.
5 Change the parameter value.
6 Press OK to accept the parameter change and return to view mode.
7 Perform one of the following actions and proceed to the next step:
• or to select other channel parameters.
MN003441A01-AP
Chapter 7 : Advanced Features
124
To Next Page
Loading...
