Motorola APX 900 - Changing the Scan List Status

• Long press the preprogrammed Scan List Programming button (side button).
• Move the preprogrammed Scan List Programming switch to programming position.
• or to ScnL then press the Menu Select button directly below ScnL .
The display shows the lists that can be changed.
2 or to the entry you want to edit.
3 Perform one of the following actions:
• Press the Top Side button to add and/or change the priority of the currently displayed
channel in the scan list.
• Press the Menu Select button directly below Del to delete the currently displayed channel
from the scan list.
• Press the Menu Select button directly below Rcl to view the next member of the scan list.
4 Perform one of the following actions to select another channel that you want to add or delete
then repeat step 3. Otherwise, proceed to the next step.
•
or to the desired channel.
• Use the keypad to enter the desired channel name.
5 Perform one of the following actions:
• Move the Scan List Programming switch out of programming position.
• Press to exit scan list programming and return to the Home screen.
See Viewing and Changing the Priority Status on page 60 for more information on how to add and/or
change the priority of the currently displayed channel in the scan list.
7.4.4
Changing the Scan List Status
Procedure:
1 Perform one of the following actions:
• Long press the preprogrammed Scan List Programming button (side button).
• Move the preprogrammed Scan List Programming switch to programming position.
The display shows the programming mode icon and the first list member.
2 or to the member you want to edit.
3 Perform one of the following actions:
• Press the Select button once to add the currently displayed channel to the scan list.
• Press the Select button one or more times to change the scan list status icon of the currently
displayed channel.
4 Perform one of the following actions:
• or to select more list members whose scan status you want to change.
• Use the keypad to go directly to that scan list member.
• Use the 16-Position Select knob to select another scan list member.
5 Press to exit scan list programming and return to the Home screen.
MN003441A01-AP
Chapter 7 : Advanced Features
59