6
General Radio Operation
r
Talkaround
• On = you are talking directly to
another radio, not through a repeater,
during conventional operation only
• Off = you are talking through a
repeater
76
C
Monitor (Carrier Squelch)
The selected channel is being monitored
during conventional operation only.
28, 35,
36
c
c
Secure Operation
• On = secure operation
• Off = clear operation
• Blinking = receiving an encrypted
voice call
79
T
Scan
The radio is scanning a scan list.
46, 46-51
S
(Dot
Blinking)
Priority 1 Channel Scan
One channel is assigned as the priority
channel during scan operation.
46, 46-50
S
(Dot Steady)
Priority 2 Channel Scan
Two channels are assigned as the priority
channels during scan operation.
46, 46-50
Location Signal
• Off = Location feature disabled, or
insufficient battery power in location
accessory device;
• Blinking = Location feature enabled,
but no location signal available;
•On = Location feature enabled, and
location signal available
99-98
Table 3: Status Symbols (Continued)
Symbol Indication Page No.
94C27-K_XTS5000_MIII.book Page 6 Tuesday, May 6, 2008 4:33 PM
To Next Page
Loading...
