76
Common Radio Features
Repeater or Direct Operation
Also known as “talkaround operation,” DIRECT lets you bypass the
repeater and connect directly to another radio. The transmit and
receive frequencies are the same.
REPEATER operation increases radio’s range by connecting with
other radios through a repeater. The transmit and receive frequencies
are different.
Select Repeater or Direct Operation
Use the Menu
1 Press U to find DIR.
2 Press D, E, or F
directly below DIR. You
momentarily see the current
operation.
• For Direct mode
• For Repeater mode
OR
3 Press D, E, or F
directly below DIR or RPTR.
If DIR is selected, the display
shows
r and DIRECT MODE.
OR
Press h to exit without
changing the current
operation.
DIR
DIRECT MODE
DIR RPTR
RPTR MODE
DIR RPTR
r
DIRECT MODE
94C27-K_XTS5000_MIII.book Page 76 Tuesday, May 6, 2008 4:33 PM
To Next Page
Loading...
