Motorola ASTRO XTS 5000 III - Use the Preprogrammed Monitor Button

ASTRO XTS 5000 Model III 27
General Radio Operation
Use the Preprogrammed Monitor Button
3 Adjust the Volume Control
knob if necessary.
4 Release the Volume Set
button.
5 Press and hold the PTT
button to transmit. The LED
lights RED while transmitting.
6 Release the PTT button to
receive (listen).
1 Turn the radio on and select
the desired zone and
channel.
2 Press the Monitor button
and listen for activity. The
Carrier Squelch indicator is
displayed. (See the following
Conventional Mode
Operation.)
3 Adjust the Volume Control
knob if necessary.
4 Press and hold the PTT
button to transmit. The LED
lights RED while transmitting.
5 Release the PTT button to
receive (listen).
A
djust
L
evel
C
A
djust
L
evel
94C27-K_XTS5000_MIII.book Page 27 Tuesday, May 6, 2008 4:33 PM