ASTRO XTS 5000 Model III 25
General Radio Operation
Mode Select Button
This feature lets you program the current zone and channel to a
Mode Select button with a long press on the Mode Select button.
After the buttons are programmed, you can return to the pre-
programmed zone and channel with a short press on the
programmed Mode Select button.
The buttons that are assigned for this feature are labeled in the
following picture.
Note:
1, 2 and 3 require a qualified technician to enable
as the Mode Select buttons.
Top Side Button
Side Button 1
Side Button 2
Keypad Number
1, 2 and 3
Top Button
94C27-K_XTS5000_MIII.book Page 25 Tuesday, May 6, 2008 4:33 PM
To Next Page
Loading...
