ASTRO XTS 5000 Model III 23
General Radio Operation
Select a Channel
Consult a qualified radio technician for the right choice between the
following methods:
Use the Preprogrammed 16-Position Select Knob
Use the Menu Entry
CHAN
After the zone you want is
displayed, turn the
16-Position Select knob to
the desired channel.
1 Press U to find CHAN.
2 Press D, E, or F
directly below CHAN.
The display shows the cur-
rent channel name (in this
case, DISP NW) blinking and
the zone (POL), not blinking.
3 Press U to find the channel
name you want.
OR
Use the keypad to enter the
channel number.
Note: If the channel you
selected is
unprogrammed, repeat
step 3.
Select
Channel
CHAN
POL DISP NW
POL DISP SE
UNPROGRAMMED
94C27-K_XTS5000_MIII.book Page 23 Tuesday, May 6, 2008 4:33 PM
To Next Page
Loading...
