22
General Radio Operation
Use the Menu Entry ZNUP or ZNDN
Use the Preprogrammed Zone Switch
1 Press U to find ZNUP and
ZNDN.
2 Press and hold D, E, or
F directly below ZNUP or
ZNDN until the zone you want
appears.
Note: Positions of ZNUP and
ZNDN on the display may
differ each time you
release D, E, or
F . Read carefully
before you press.
1 If a control on your radio has
been preprogrammed as the
Zone switch, move the Zone
switch to the position for the
zone you want.
Note: If the zone you selected
is unprogrammed, repeat
step 1.
2 Press h to confirm the
displayed zone and channel.
ZNUP ZNDN
POL DISP NW
FIRE DISP NW
FIRE DISP NWUNPROGRAMMED
FIRE DISP NW
94C27-K_XTS5000_MIII.book Page 22 Tuesday, May 6, 2008 4:33 PM
To Next Page
Loading...
