44
Common Radio Features
4 Press D, E, or F
directly below SCAN. You see
the first list member.
p (flashing) indicates the
programming mode.
5 Press V or U to find the
member you want to change.
6 Press D, E, or F
directly below SEL or DEL or
RCL.
SEL = add and/or change the priority of the currently displayed
channel in the scan list.
DEL = delete the currently displayed channel from the scan list.
RCL = view the next member of the scan list.
Note: The maximum number of members for a trunking priority
monitor scan list is 15; for a conventional scan list, 15; and
for a talkgroup scan list, 10.
7 To change the priority of the
currently displayed channel,
press D, E, or F
below SEL additional times to
see
T or S or S or no icon.
T = this channel is in the scan list as a non-priority channel.
S = this channel is in the scan list as the priority 2 channel.
S (dot flashing) = this channel is in the scan list as the priority 1
channel. You will hear all traffic on the priority 1 channel,
regardless of traffic on non-priority channels.
no icon = this channel is deleted from the scan list.
Note: You cannot delete a priority channel from a scan list. In a
talkgroup scan list, priority cannot be assigned.
FIRE DISP NW p
SEL DEL RCL
SEL DEL RCL
T or S or S or no icon
To Next Page
Loading...
