Motorola AX Series User Manual

41
11. Advanced settings
11.1 Base settings
11.1.1 Change PIN
Some functions are protected by a 4 digit PIN code which must be entered if the
settings are changed. The default depends on the base. The PIN can be changed to
a preferred number.
When entering a PIN, the digits are shown as ****
1. Press Menu , scroll d to Advanced Settings and press Select .
2. Base Settings is highlighted. Press Select .
3. Change PIN is highlighted. Press Select .
4. Enter the old PIN and press OK .
5. Enter the new PIN and press OK .
6. Re-enter the new PIN and press Save .
7. Press e to return to standby.
Note
The default PIN is 0000.
11.1.2 Base version
1. Press Menu , scroll d to Advanced Settings and press Select .
2. Base Settings is highlighted. Press Select .
3. Scroll d to Base Version and press Select .
4. The Firmware and Hardware Versions, Serial Number and MAC address will be
displayed.
5. Press e to return to standby.
11.1.3 Restore base default settings
1. Press Menu , scroll d to Advanced Settings and press Select .
2. Base Settings is highlighted. Press Select .
3. Scroll d to Base Reset and press Select .
4. Confirm? is displayed. Press Yes to confirm or No to cancel.
Note
If you reset the base settings all the base settings will return to their default
settings, e.g. intrusion call, flash mode, dial mode and area code settings.
Resetting the base to default settings will also impact the following:
• Date & time.
• Contacts list will be cleared.
• Calls List will be cleared.
Advanced settings

Motorola AX Series Specifications

General

Brand	Motorola
Model	AX Series
Category	Telephone
Language	English