42
11.2 Internal names
This will show you the list handsets registered to the base.
1. Press
Menu
, scroll d to
Advanced
Settings
and press
Select
.
2. Scroll d to
Internal Names
and press
Select
.
3. Scroll u or d to the required handset and press
Options
.
Dial
- to intercom the selected handset.
Dial
option is only available if the
handset selected is not the handset in use.
Edit
- to edit the handset name.
Delete
- to unregister the selected handset.
4. Press e to return to standby.
11.3 Line settings
11.3.1 Intrusion call
When intrusion is set to allowed, if a call is in progress a second handset can
connect without being invited, creating a 3-way call.
1. Press
Menu
, scroll d to
Advanced
Settings
and press
Select
.
2. Scroll d to
Line Settings
and press
Select
.
3. Enter the PIN and press
OK
.
4.
Intrusion Call
is highlighted. Press
Select
.
5. Scroll u or d to
Not Allowed
or
Allowed
and press
Select
.
6. Press e to return to standby.
11.3.2 Flash mode
1. Press
Menu
, scroll d to
Advanced
Settings
and press
Select
.
2. Scroll d to
Line Settings
and press
Select
.
3. Enter the PIN and press
OK
.
4. Scroll d to
Flash Mode
and press
Select
.
5. Scroll u or d to the required Flash time (Flash 1: 100ms, Flash 2: 600ms) and
press
Select
.
6. Press e to return to standby.
11.3.3 Dial mode
1. Press
Menu
, scroll d to
Advanced
Settings
and press
Select
.
2. Scroll d to
Line Settings
and press
Select
.
3. Enter the PIN and press
OK
.
4. Scroll d to
Dial Mode
and press
Select
.
5. Scroll u or d to
Tone
or
Pulse
and press
Select
.
6. Press e to return to standby.
Advanced settings
To Next Page
Loading...
