Motorola C1CB+ - Using the Phone; Switch the Handset on; off; Calls; Make a Call

17
Using the phone
3. Using the phone
Note
The handset will automatically time the duration of all external calls. The call
timer will display after the first 10 seconds of the call. When the call ends, the
total duration of the talk time stays on the display for 3 seconds.
3.1 Switch the handset on / o
Press and hold e to switch the handset on or o.
3.2 Calls
3.2.1 Make a call
1. Press .
2. When you hear the dial tone, dial the number.
3.2.2 Preparatory dialling
1. Dial the number first. If you make a mistake, press
B
to delete the last
digit.
2. Press to dial.
3.2.3 End a call
Press e, or place the handset back on the base or charger.
3.2.4 Receive a call
When you receive an external call, the phone rings and flashes on
the display.
1. Press to answer the call.
Note
To answer calls by simply lifting the handset from the base, switch Auto answer
on.
3.3 Adjust the earpiece volume
During a call, press u or
d
to increase or decrease the volume. There are 5
levels to choose from.
3.4 Mute
You can mute your handset so that you can talk to someone nearby without
your caller hearing.
1. During a call, press . The display shows MUTE ON and your caller cannot
hear you.
2. Press again to resume your call.