Motorola C1CB+ - Getting Started

8
Getting started
1. Getting started
Location
Important
Do not place your C1CB+ in the bathroom or other humid areas.
Place your C1CB+ base within reach of the AC power outlet and telephone wall
socket. The socket-outlet should be installed near the equipment and should
be easily accessible.
Make sure that it is at least one metre away from other electrical appliances
to avoid interference. Your C1CB+ works by sending radio signals between the
handset and base. The strength of the signal depends on where you place the
base. Placing it as high as possible ensures the best signal.
Handset range
The unit has a range of up to 300 metres outdoors when there is a clear line
of sight between the base and handset. Any obstruction between the base
and handset will reduce the range significantly. With the base indoors and the
handset either indoors or outdoors, the range will normally be up to 50 metres.
Thick concrete and stone walls can severely aect the range.
Signal strength
on your handset indicates that you are within range of the base. When out of
range of the base, flashes. If you are on a call, you will hear a warning beep.
The line will hang up if the handset moves out of range of the base. Move it
closer to the base. The handset will automatically reconnect to the base.
Setting up
Important
The base station must be plugged into the AC power at all times. Do not
connect the telephone line cord into the wall socket until the handset is fully
charged. Use only the power adaptor and telephone line cord supplied with
the product.