Motorola C1CB+ - Hands-Free; Make a Hands-Free Call; Answer a Call Hands-Free; Switch to Hands-Free During a Call

19
Using the phone
3.6 Hands-free
To talk to the caller without holding the handset and for other people in the
room to listen to the conversation over the loudspeaker, simply use the
hands-free function.
3.6.1 Make a hands-free call
1. Press twice, then dial the number. is displayed and the call can be
heard over the handset loudspeaker.
2. Press to switch the call between the earpiece and the loudspeaker.
3. Press e to end the call.
Note
During a hands-free call, press u or
d
to adjust the volume.
3.6.2 Answer a call hands-free
When the phone rings, press twice to answer the call.
3.6.3 Switch to hands-free during a call
1. During a call, press to put the call on the loudspeaker.
2. To switch hands-free o and return the call to the earpiece, press again.
3.7 Redial
The last 10 entries dialled are stored in the redial list.
3.7.1 View or dial an entry
1. Press to open the redial list.
2. Scroll u or
d
to the entry you want.
3. Press to dial the displayed entry or press e to return to standby mode.
Note
If you have Caller ID and the caller’s number exactly matches an entry stored in
the phonebook, the name is displayed.
3.7.2 Copy a Redial list number to the phonebook
1. Press to open the redial list.
2. Scroll u or
d
to the entry you want.
3. Press , the display shows VIEW .
4. Scroll u or
d
to SAVE NUMBER .
5. Press . The display shows ENTER NAME .
6. Enter the name and press . The number is displayed.
7. Edit the number if necessary, then press . The number is stored.
See ‘Entering names’ and ‘Writing tips’ on page 21.