20 January 23, 2003 6809456A82
Disassembly C350 Series
Disassembly
This section describes how to disassemble a C350 Series telephone. Tools and
equipment used are listed in Table 1, preceding.
Removing and Replacing the Rear Housing Cover
1. Ensure the phone is turned off.
2. Press down on the rear housing cover latch on the top end of the phone, gently
lift the rear housing cover away from the latch and slide the rear housing cover
in the direction of the arrow, and lift the cover away from the phone
(see Figure 4).
G
Many of the integrated devices used in this equipment are vulnerable to damage
from electrostatic discharge (ESD). Ensure adequate static protection is in place
when handling, shipping, and servicing the internal components of this equipment.
G
Avoid stressing the plastic in any way to avoid damage to either the plastic or
internal components.
To Next Page
Loading...
