11
charged after 10 minutes (this time will be dependent on the battery capacity).
This is normal behaviour and is a reminder to charge the handset to prevents calls
being dropped.
1
All talk and standby times are approximate and depend on features selected and
usage pattern.
Welcome
1. The Welcome screen will briefly appear on the cordless handset display, then a
list of countries is displayed.
2. Scroll
u or d to your country (operator) and press m.
3. Using the keypad set the date using the format DD/MM/YYYY and press
m.
4. Using the keypad set the time in 24 hour format and press
m.
5. The standby screen is then displayed and your phone is ready to use.
Date and time
If you have subscribed to a Caller ID service, the date and time is set automatically
when you receive your first call.
If you do not have Caller ID service, you can set the date and time manually.
From the cordless handset
1. Press
m, the display shows
Phonebook
.
2. Scroll
d to
Phone setup
and press m.
3. Scroll
d to
Date & time
. Press m.
4. Using the keypad enter the date (e.g. 04-12-2019 for 4th of December 2019)
and press
m
to confirm.
5. Enter the time in 24 hour format (e.g. 18-30 for 6:30pm) and press
m.
From the corded base
1. Press
m, scroll d to
PHONE SETUP.
2. Press m, scroll d to
DATE & TIME
and press m.
3. Using the keypad enter the date (e.g. 04-12-2019 for 4th of December 2019)
and press
m
to confirm.
4. Enter the time in 24 hour format (e.g. 18-30 for 6:30pm) and press
m to
confirm.
Note
Only the last two digits of the year are adjustable.
Your C42 is now ready for use.
Getting started
To Next Page
Loading...
Need help?
General
