27
Services
6.4 Recall time
This setting is useful to access certain network and PABX / switchboard services.
The default C42 recall time is suitable for your country and network operator. It is
unlikely that you should need to change this setting unless advised to do so.
1. Press
m, scroll d to
SERVICES
and press m.
2. Scroll
d to
RECALL TIME
and press m.
3. Scroll
u or d to
SHORT
,
MEDIUM
or
LONG
and press m to confirm.
6.5 Dial mode
Your C42 is set to tone dialling. You should only need to change this if connected
to an older type of switchboard / PABX which requires pulse dialling.
1. Press
m, scroll d to
SERVICES
and press m.
2. Scroll
d to
DIAL MODE
and press m.
3. Scroll
u or d to
TONE
or
PULSE
and press m to confirm.
6.6 Auto Clock
If you have subscribed to Caller ID Service, the date and time will be set on your
base whenever a call is received. This feature can be set to On or O.
1. Press
m, scroll d to
SERVICES
and press m.
2. Scroll
d to
AUTO CLOCK
and press m.
3. Scroll
d to
ON
or
OFF
and press m to confirm.
6.7 De-register a handset
Use your base to de-register a handset.
1. Press
m, scroll d to
SERVICES
and press m.
2. Scroll
d to
UNREGISTER
and press m.
3. The display shows PIN, using the keypad enter the PIN and press
m.
4. Scroll to the handset you want to de-register and press
m to confirm.
6.8 Default settings
Phonebook Unchanged
Calls list No Number
Redial list No Number
Dial mode Tone
Recall time Short
To Next Page
Loading...
Need help?
General
