9
Connecting the corded base and handset
1. Plug the telephone line cord into the socket marked on the rear of the base.
2. Plug the power adaptor into the socket marked
on the rear of the base
and plug the other end into the mains power wall socket. Switch on the mains
power.
3. Plug the curly cord into the corded handset and the telephone base.
Connecting the charger and charging the cordless handset
1. Plug the power adaptor into the socket marked on the underside of the
charger and plug the other end into the mains power wall socket.
2. Remove the battery cover from the back of the handset and insert the 2
x AAA NiMH rechargeable batteries supplied. Please note the ‘+’ and ‘-’
markings inside the battery compartment and insert in the correct direction.
Getting started
To Next Page
Loading...
Need help?
General
