Motorola CT310 User Manual

11Using the phone
3.3 Redial
The last entry dialled is stored in the phone; this can be up to 32 digits long.
1. Pick up the handset and press
.
Or:
2. Press
and then .
3. Once the call is answered lift the handset to talk.
3.4 Redial list
At least the last 8 entries dialled are stored in the phone, the numbers can be up to 16
digits long.
To dial a number from the Redial list
1. Press
.
2. Keep pressing
to scroll to the entry you want.
3. Press and hold
button for 3 seconds to scroll through the numbers quickly.
4. Lift the handset or press
to dial the displayed entry.
3.5 Dial mode
Your phone is set to tone dialling. You should only need to change this if connected to an
older type of switchboard / PABX which requires pulse dialling.
1. Press and hold
for 3 seconds to change the setting.
3.6 Recall mode
Recall is useful to access certain network services and PABX /switchboard services. Your
CT310 has 2 recall buttons
is the short flash time and is for long flash time.
NOTE
R1 Short flash is 100ms / R2 Long Flash is 600ms.
Flash keys are used to refresh a dial tone. When on an external call, press R2 to access
a Call Waiting Line when a call waiting prompt signal is heard. Press again to toggle
between the two calls.
For more information about network services contact your network operator.
3.7 Turn anti-dialling from an extension on / o
On some PABX’s you can set the CT310 to cause interference on the line so another
extention cannot be used.
1. Press and hold
for 3 seconds to change the setting to “ PPP OFF ” or PPP O n ”.

Motorola CT310 Specifications

General

Brand	Motorola
Model	CT310
Category	Telephone
Language	English