Motorola CT310 - PABX Access Code Entry; Storing PABX Access Code

17PABX access code
8. PABX access code
If the CT310 is connected to a switchboard, you may need to enter a one-digit access
code in the dialling sequence to be able to connect to the outside line.
The access code will be displayed at the beginning of a number on the screen.
8.1 Store the PABX access code
1. Press and hold for 3 seconds, the display shows SEt 1 dAtE .
2. Scroll
u or d to SEt 3 PCOdE .
3. Press
, the display shows PCOdE - .
4. The
- is flashing, press u or d to scroll to the correct digit from 0 - 9 .
5. Press
to conrm.
6. Press
to exit.