10
Getting started
1. Getting started
Location
Important
Do not place your D87 in the bathroom or other humid areas.
Place your D87 base within reach of the AC power outlet and telephone wall
jack. The socket-outlet should be installed near the equipment and should be
easily accessible.
Make sure the base is not placed too close to other electrical appliances to
avoid interference. Your D87 works by sending radio signals between the
handset and base. The strength of the signal depends on where you place the
base. Putting it as high as possible ensures the best signal.
Handset range
Make sure the base and handset are placed within range of each other. Any
obstruction between the base and handset will reduce the range significantly.
Thick concrete and stone walls can severely aect the range.
Setting up
Important
The base station must be plugged into the AC power at all times. Use only the
AC power adaptor and telephone line cord supplied with the product.
To Next Page
Loading...
Need help?
General
