51
11.10 Remote access
You can operate your answering machine from any DTMF phone by calling
your product and entering a 4 digit security PIN code.
1. Dial your telephone number. When you hear your outgoing message,
press * to enter remote access mode.
2. Enter your 4-digit PIN (default setting 0000) you will hear a confirmation
beep. Use the keypad to operate the answering machine.
Press 1 to listen to the current
message again.
Press 6 to listen to the next message.
Press 2 to listen to all messages. Press 8 to listen to outgoing messages.
Press 3 to delete the curent message. Press 9 to record an outgoing
messages.
Press 4 to listen to the previous
message.
Press 0 to enter the remote access
menu.
Press 5 to turn the answering
machine on or off.
Press # to enter answer mode.
11.10.1 Set the remote access on/o
1. Press the left C key,
Answer Phone
is displayed.
2. Press the left C key, scroll E to
Settings
.
3. Press the left C key, scroll E to
Remote access
.
4. Press the left C key, select
On/o
.
5. Press the left C key, scroll the left or right navigation key to select
On
or
O
.
6. Press the left C key to confirm.
11.10.2 Change the remote PIN
1. Press the left C key,
Answer Phone
is displayed.
2. Press the left C key, scroll E to
Settings
.
3. Press the left C key, scroll E to
Remote access
4. Press the left C key, scroll E to select
Change PIN
.
5. Press the left C key, you need to recall the old PIN that is used for the
remote access and call control.
6. Press the left C key, enter the old PIN.
7. Press the left C key, enter the new PIN.
8. Press the left C key, enter the new PIN again.
9. Press the left C key to confirm.
11.11 Telephone answer machine language
1. Press the left C key,
Answer Phone
is displayed.
2. Press the left C key, scroll E to
DTAM Language
.
3. Press the left C key, scroll U or E to select the required language and
press the left C key to confirm.
Using your Answering Machine
To Next Page
Loading...
Need help?
General
