Motorola D8711 User Manual

24
4 Using the phone
4.1 Switch the handset on / o
1. Press and hold H.
4.2 Calls
4.2.1 Make a call
1. Press L.
2. Dial the number.
4.2.2 Preparatory dialing
1. Dial the number first. If you make a mistake, press the right O key to delete
the last digit.
2. Press L.
3. Scroll U or E to select the landline or mobile device from which you want
to make a call.
4. Press L to dial.
4.2.3 Quickdial call
1. If you have stored the quickdial numbers, press and hold on the keypad in
standby. Then select the landline or mobile device from which you want to
make a call. The saved phone number will dial automatically. To set up a
quickdial number, see page 31.
4.2.4 Call from the Contacts or Calls list
1. You can make a call from the Contacts (see page 28) or Calls list (see
page 45).
4.2.5 Make a call from the paired Bluetooth device
Make sure you have paired your mobile device to D87, see page 21.
1. Press J in standby, Home Phone is displayed on the top of the handset
screen.
2. Press the right navigation key once to view contacts stored in mobile
device 1, or press the right navigation key again to view contacts stored in
mobile device 2.
3. Scroll U or E to select a contact . Press L.
4. Press U or E to confirm whether the landline or mobile line will be used to
make the call.
4.2.6 End a call
1. Press H, or place the handset back on the base or charger cradle.
Note
If Auto end call (see page 40) is switched o, you will need to press H to
end a call.
Using the phone

Motorola D8711 Specifications

General

Brand	Motorola
Model	D8711
Category	Cordless Telephone
Language	English