Motorola D8711 User Manual

41
Settings
5. Press E, scroll the left and right navigation keys to select a volume level
(1 - 5 and Ringer O).
6. Press the left C key to confirm or right C key to return to the previous
menu.
9.6.2 Flash time
Depending on your country and network operator, your phone has the flash
time set to Long . It is unlikely that you need to change this setting unless
advised to do so.
1. Press the left C key. Scroll U to Settings.
2. Press the left C key, scroll E to select Base settings .
3. Press the left C key, scroll E to select Flash time .
4. Press the left C key, press U or E to select Short, Medium or Long .
5. Press the left C key to confirm.
9.6.3 Dial mode
Your phone is set to tone dialing. You should only need to change this if
connected to an older type of switchboard / PBX which requires pulse dialing.
1. Press the left C key, scroll U to Settings.
2. Press the left C key, scroll E to select Base settings .
3. Press the left C key, scroll E to select Dial mode .
4. Press the left C key. Then press U or E to select Tone or Pulse .
5. Press the left C key to confirm.
9.6.4 Area code
The area code must be 3 digits long.
1. Press the left C key, scroll U to Settings.
2. Press the left C key, scroll E to select Base settings .
3. Press the left C key, scroll E to select Area code .
4. Press the left C key, enter or edit the area code.
5. Press the left C key to confirm.
9.6.5 PBX code
If you are connected to a switchboard, you may be required to enter a PBX
code (e.g. '9') before you dial the number. Your phone will automatically add
this code in front of each number you dial.
1. Press the left C key, scroll U to Settings.
2. Press the left C key, scroll E to select Base settings .
3. Press the left C key, scroll E to select PBX code .
4. Press the left C key, enter the code.
5. Press the left C key to confirm.

Motorola D8711 Specifications

General

Brand	Motorola
Model	D8711
Category	Cordless Telephone
Language	English