50
11.8.3 Set the answer machine auto on/o
You can set the time when the answer machine turns on or o.
1. Press the left C key,
Answer Phone
is displayed.
2. Press the left C key, scroll E to
Settings
.
3. Press the left C key, scroll E to
Auto on/o
.
4. Press the left C key, under
On/o
, scroll the left or right navigation key to
select
O
,
On once
,
Daily
,
Mon - Fri
,
Sat
or
Sun
.
5. Scroll E to
On time
, enter the time for the answer machine to switch on
(HH:MM) e.g. 04:30.
6. Scroll E to
AM
/
PM
, if you have selected the 12 hours format (see page
13), press the left or right navigation button to select
AM
or
PM
.
7. Scroll E to
O time
, enter the time for the answer machine to switch on
(HH:MM) e.g. 04:30.
8. Scroll E to
AM
/
PM
, if you have selected the 12 hours format (see page
13), press the left or right navigation button to select
AM
or
PM
.
9. Press the left C key to save.
11.9 Ring delay
Select the duration of rings before your answer machine picks up the call.
Choose from 2-10 rings or
Time saver
.
• When set to
Time saver
, if you have new messages, your phone answers
after 2 rings.
• If there are no new messages it will answer after 6 rings. So you have the
option to hang up, saving the time and cost of a call.
• If the memory is full, it will automatically revert to
Answer only
mode.
1. Press the left C key,
Answer Phone
is displayed.
2. Press the left C key, scroll E to
Ring Delay
.
3. Press the left C key, scroll U or E to select either
Answer only
or
Ans. & record
.
4. Press the left C key, scroll the left and right navigation keys to select the
number of rings required and press the left C key to confirm.
Note
You can also access the ring delay menu under Answer Phone > Settings on
the handset.
Using your Answering Machine
To Next Page
Loading...
