37
Clock and alarm
8. Clock and alarm
If you have subscribed to Caller ID Service, the date and time will be set on
your handset whenever a call is received. You can also manually set the date
and time.
8.1 Setting the alarm
1. Press the left C key. Scroll E to
Clock/Alarm.
2. Press the left C key, select
Alarm
.
3. Press the left C key, scroll the left and right navigation keys to select
On
once
,
On daily
,
Mon to Fri
,
Sat & Sun
or
O
.
4. Scroll E, enter the time (HH:MM) e.g. 04:30.
5. Scroll E, press the left or right navigation keys to select
AM
or
PM
if you
preset the time format to 12 hours.
6. Scroll E, scroll the left and right navigation key to select a melody. Press
the left C key to save.
Note
Once the alarm is set to on, is displayed. When the alarm sounds, press L,
H or the right C key to stop the alarm. Pressing any other key will snooze the
alarm.
8.2 Setting time & date
1. Press the left C key. Scroll E to
Clock/Alarm.
2. Press the left C key, scroll E to select
Time and date
.
3. Press the left C key, enter the time (HH:MM) e.g. 04:30.
4. Scroll E, press the left or right navigation key to select
AM
or
PM
if you
preset the time format to 12 hours.
5. Scroll E, enter the date using the format MM-DD-YYYY e.g. 08/27/21 for 27
August 2021 and press the left C key to save.
8.3 Setting the time format
1. Press the left C key, scroll E to
Clock/Alarm.
2. Press the left C key, scroll E to select
Time format
.
3. Press the left C key, press the left or right navigation keys to select
12 Hours
or
24 Hours
.
Then press the left C key to save.