62
California Energy Commission(CEC)/Canada Battery
Charger(NRCAN) Battery Charging Testing
It is not necessary to activate testing mode during normal usage, unless you
want to charge the battery only and disable all telephone functions.
To activate the battery charge testing mode:
1. Ensure handset and base are powered and in range.
2. Press the left C key, and enter *2201 to enter
Test Mode
.
3. Select
Base
and press the left C key.
4. Scroll U to
BS_CEC mode
and press the left C key to confirm.
5. Press H.
To deactivate/exit the battery charge testing mode.
1. Unplug the base power, reconnect the base power.
2. Press the left C key, and enter *2201 to enter
Test Mode
.
3. Select
Handset
and press the left C key.
4. Scroll U to
HS_CEC mode
and press the left C key to confirm.
5. After Handset link to base, it is back to normal mode.
General informaton
To Next Page
Loading...
