DCT3400 Series User Guide
7
Table2-2
Rear panel connections
Key Item Function
1
RF IN F-type coaxial cable input
2*
RF OUT RF video output
3
IR Mini phono jack enabling the DCT3412 to control a
VCR using an optional, low-power IR Blaster
transmitter (not all IPGs support this feature)
4
S-VIDEO
S-Video high-quality video output to a VCR or TV
that accepts S-Video
5
VIDEO OUT RCA-type video output to a VCR or TV
6
Y Pb Pr Component video output to an HDTV
7**
ETHERNET Ethernet 10/100Base-T input
8
SPDIF Coaxial Dolby
®
Digital 5.1 or PCM audio output
9
OPTICAL SPDIF Optical digital Dolby Digital 5.1 audio or PCM audio
output
10
AUDIO OUT L and R (left and right) RCA-type stereo audio
output jacks
11
HDMI HDMI video output to an HDTV (can connect to a
DVI input using an HDMI-to-DVI converter cable)
12**
USB USB 2.0 connector for devices such as keyboards,
joysticks, scanners, disk storage, PCs, printers, or
digital cameras
13
SATA Connector for optional external hard drive
14
IEEE 1394 IEEE 1394 connector for connecting to audio and
video devices such as a digital television (DTV).
15
AC power AC power connector:
• The bottom plug is an input for the AC power
cord
• The top plug is an unswitched power outlet for
a device such as a TV or VCR
* The RF
OUT connection is an optional feature and may not be present on
your DCT3400 model
** These connectors (USB and ETHERNET) are not enabled and require
the support of the application software
To Next Page
Loading...
