DCT3400 Series User Guide
27
Depending on the TV’s inputs:
1 If possible, use the S-VIDEO and AUDIO connectors on the DCT3412.
2 If the TV has no S-Video input, use the composite VIDEO and AUDIO
connectors on the DCT3412.
3 If the TV has an RF input only, use the RF OUT connector on the
cable terminal. The RF connection carries video and audio.
Connecting a Stereo TV
1 Connect an RF coaxial cable to the cable wall outlet and the
CABLE IN connector on the cable terminal.
2 Connect the stereo audio cable to the AUDIO R and L connectors on
the cable terminal and the corresponding connectors on the
stereo TV.
3 Connect an S-video cable to the S-VIDEO connectors on the cable
terminal and the TV.
or
Connect a video cable to the
VIDEO OUT connector on the cable
terminal and the
VIDEO IN connector on the TV.
OR
1 Connect an RF coaxial cable to the cable wall outlet and the
CABLE IN connector on the cable terminal.
2 Connect an RF coaxial cable to the RF OUT connector on the cable
terminal and the RF connector on the TV.
This video connection method does not support HD video. For more
information, see “Connecting an HDTV – Video Only.”
To Next Page
Loading...
