Motorola G24 - Interface Connector Specifications

Interface Connector Specifications
58 Module Hardware Description January 1, 2006
Interface Connector Specifications
The G24 uses a single 70-pin, 0.5 mm pitch, board to board connector for the application
interface, which is available in 2 stacking height versions, as described in Table 4-1.
Figure 4-2 shows the G24 interface connectors.
Figure 4-2: G24 Interface Connectors
Table 4-2 describes the G24 interface connectors characteristics.
Table 4-1:
G24 interface connector options
G24 Model G24 Connector Mating Connector Stacking Height
F6402AAA Molex 53748-0708 Molex 52991-0708 3.0 mm
F6403AAA Molex 53885-0708 Molex 54102-0708 2.5 mm
Table 4-2: Interface Connector Specifications
Parameter 53748 (3.0 mm) 53885 (2.5 mm)
Contacts 70 70
Rows 22
Pitch 0.5 mm 0.5 mm
Maximum Current 500 mA 500 mA
Maximum Voltage 50 V 50V
Contact Resistance 50 mΩ maximum 40 mΩ maximum
Insulation
Resistance
100 MΩ minimum 100 MΩ minimum
Durability 50 mated cycles
maximum
30 mated cycles
maximum
Stacking Height 3.0 mm 2.5 mm
Mates with Molex 52991-0708 Molex 54102-0708