Motorola GP-68

Special Programming Mode (SPM)
35
Setting the Alert Tone Volume
➊
In SPM, rotate the Channel Selector Knob (2) to
the Alert Tone Volume (
or ) menu.
➋
Use or (or ) to toggle between On
and Off.
NOTE
When is chosen, the alert tone volume fol-
lows the volume control setting (see
“Adjusting
the Volume” on page 14).
CAUTION
The new setting is stored immediately.
➌ To exit this menu, select another menu item by
turning the Channel Selector Knob (2).
Setting the Battery Saver Status
When enabled, the Battery Saver feature increases
the amount of time between battery replacement or
charging. Battery power is conserved by turning off the
receiver circuitry, except for periodic checks for carrier
activity.
➊
In SPM, rotate the Channel Selector Knob (2) to
the Set Battery Saver Status (
- Off, or
- Normal, or - Enhanced) menu.
➋
Use the or (or ) to scroll through the
three options.
CAUTION
The new setting is stored immediately.
ME
M
ME
M